CS-2200 Icom IC-2200H Programming Software Setup Free
How to Install and Use CS-2200 Icom IC-2200H Programming Software for Free
The Icom IC-2200H is a VHF transceiver that offers both analog and digital (D-Star) modes, with a wide range of features and functions. To program the radio, you need the CS-2200 programming software and the OPC-478/U/UC cloning cable. However, the software is not free and requires a license key to activate. In this article, we will show you how to install and use the CS-2200 software for free, without a license key.
Step 1: Download the CS-2200 Software
The first step is to download the CS-2200 software from a reliable source. You can find the software on various websites, such as [this one]. Make sure you download the correct version for your operating system (Windows or Mac). The file size is about 3 MB.
Step 2: Install the CS-2200 Software
The next step is to install the CS-2200 software on your computer. To do this, follow these steps:
Double-click on the downloaded file to launch the installer.
Follow the on-screen instructions to complete the installation. You may need to accept the terms and conditions and choose a destination folder.
When the installation is finished, you will see a shortcut icon on your desktop or in your start menu.
Note: You do not need to enter a license key during the installation process. The software will work without it.
Step 3: Connect the IC-2200H Radio to Your Computer
The third step is to connect the IC-2200H radio to your computer using the OPC-478/U/UC cloning cable. To do this, follow these steps:
Turn off the radio and disconnect the power supply.
Connect one end of the cloning cable to the data port on the back of the radio.
Connect the other end of the cloning cable to a USB port on your computer.
Turn on the radio and set it to VFO mode.
Note: You may need to install a driver for the cloning cable if your computer does not recognize it automatically. You can find the driver on [this website].
Step 4: Run the CS-2200 Software
The final step is to run the CS-2200 software and program your radio. To do this, follow these steps:
Double-click on the shortcut icon or launch the software from your start menu.
Select your language and click OK.
Select your communication port from the drop-down menu. It should be COM1 or COM2 by default.
Click on File > Read from Transceiver to download the current settings from your radio.
Edit or modify the settings as you wish. You can change various parameters, such as frequency, tone, power, scan, etc.
Click on File > Write to Transceiver to upload the new settings to your radio.
Wait for the confirmation message and click OK.
Disconnect the cloning cable and turn off the radio.
Congratulations! You have successfully installed and used the CS-2200 Icom IC-2200H programming software for free. You can now enjoy your radio with customized settings and features.